Thanks for the picture! The Bargman Tail Light w/ License Bracket item # 30-92-003 does look like it would be the correct replacement for your Keystone 5th wheel trailer. To confirm this you will just want to take a few measurements. The lens of the item # 30-92-003 measures 8-9/16" long x 4-9/16" tall and the mount holes are 7-1/8" long x 3-1/8" apart.
I have linked a diagram below that will give you all of the dimensions of this light so you can confirm it is the correct replacement.... view full answer...
The factory brake controller in your 2016 Chevy 3500 is compatible with all of our Electric Over Hydraulic Actuators when you use the HydraStar Electric Over Hydraulic Actuator Adapter Module for Ford and Chevy Brake Controllers # HBA-CAM. This will work with any of our EOH actuators to ensure a good connection without error messages.
My recommendation is to use the HydraStar Electric Over Hydraulic Actuator Kit for Disc Brakes - 1,600 psi # HBA16-252-82 or the Kit for Drum Brakes -... view full answer...
The Fan-Tastic Replacement Fan Motor Assembly Kit # FVK8017-00 is indeed the correct part for your Fantastic Fan Model 6505-414. I confirmed with my contact at Fan-Tastic vent. view full answer...
The correct Curt Custom Fifth Wheel Installation Kit for a 2001 Ford F-250 is part # C16443-204 which will work just fine with a Reese 5th Wheel Hitch. view full answer...
The Replacement Low Profile Handle for Reese M5 5th Wheel Trailer Hitches # RP58553 has inside dimensions of 3/8" tall x 1-1/8" wide. The two holes have a spacing of 2" center on center. view full answer...
I was not able to reference the part number "VMI900L" but in order to determine if the Replacement Follow Jack w/ Drop Leg part # LG-179014 is the correct replacement for you, you will need to measure the distance between the bracket stops on your existing follow-leg. If this distance is 15-1/2" from inside to inside or 17-1/2" from outside to outside then above follow leg will work well for you.
I have attached a photo with the above dimensions for you as well. view full answer...
The 5th Airborne Premium Fifth Wheel Air Ride Coupler # RP78FR that you referenced will have the 2 mounting holes to install the Demco Hijacker Autoslide Locking Plate # DM6026 that you would need. The pin box in the picture was used for demonstration purposes which is why it doesn't have those holes.
If you check out the attached picture of the 5th Airborne Premium Fifth Wheel Air Ride Coupler for Leland 7920 Trailer Frames, you can clearly see the 2 mounting holes. view full answer...
I don't have specific measurements on the ball for the replacement suction cup mounts but what I can tell you is that the correct one for the Furrion 4.3" monitor is part # LC776462 and the correct one for the Furrion 5" and 7" monitors is part # FR79SR. view full answer...
You are correct that Lippert part # LC179013, their 5th Wheel RV Landing Gear Lead Leg, is the correct part to replace the damaged unit on your 2011 Keystone Cougar. view full answer...
Your Linear Series LS6050DVD is made by Magnadyne. We do not carry their products so I cannot comment on their durability. The Jensen electronics we sell are made by ASA Electronics who has been around since 1977. They specialize in heavy-duty products for the marine and RV industries.
The warranty on the Jensen head unit # JWM60A is one year from date of purchase, according to my contact at ASA. This unit does have three speaker zones, with 8-speaker connectivity, but this unit does not... view full answer...